General Description /产品概述
The BM3560 is a professional protection IC for 6 cells rechargeable battery
pack; it is highly integrated,
high accuracy and generally used in high-and-mid end power tools, electric
bicycle and UPS applications.
The BM3560 works constantly to monitor each cell's voltage, the current of
charge or discharge, wire
breaking or not and the temperature of the environment to provide overcharge,
over-discharge, discharge
overcurrent, short circuit, charge overcurrent, breaking wire and temperature
protections, etc. Besides, it
also can change the protection delay time of over-discharge and discharge
overcurrent by setting the
external capacitors.
BM3560 系列是一款6节专用的可充电电池保护芯片,具有高精度、高集成度的特点,适用于中高端电
动工具,电动自行车以及 UPS 后各电源等应用领域。芯片迎过检测各 节电池的电压、充放电电流、环境温
度以及采样线通桥等信息实现电池过充、过放、放电过电流、短路、充电过电流、高低温以及断线等保护功
能,同时可通过外置电容灵活调节过放、放电过流1、放电过流2的保护延时。
Features /功能特点
(1) High-accuracy voltage detection for each cell
各节电池的高精度电压检测功能:
? Overcharge threshold
36V ~46 V
过充电检测电压
? Overcharge hysteresis
0.12 / 0.20 V
过充电迟滞电压
? Over-discharge threshold
16V -30 V
过放电检测电压
? Over-discharge hysteresis 0 / 0.2 / 0.4 V
过放电迟滞电压
(2) Three grades voltage detection of discharge overcurrent
3段放电过电流检测功能:
? Discharge overcurrent 1
0.050 V ~ 0.150 V (25 mV step)
过电流检测电压 1
? Discharge overcurrent 2
0.1 / 0.2 / 0.3 / 0.4 V
过电流检测电压 2
- Short circuit
0.4 / 0.5 / 0.6 / 0.8 V
短路检测电压
(3) Charge overcurrent detection
Detection voltage
-0.030 V ~-0.150 V (10 mV step)
充电过电流检测电压
(4) Setting of output delay time
延时外罝可调
accuracy: ?25 mV (+25°C)
精度 +25mV (+25°C)
accuracy: +40 mV (-40°C to +85°C)
精度?40mV (-40°C至+85°C)
accuracy: +50 mV
精度 +50mV
accuracy: +80 mV
精度 ?80.mV
accuracy: ?100 mV
精度士100.mV
accuracy: ?15 mV
精度+15 mV
Over-discharge, discharge overcurrent 1
and discharge overcurrent 2 protection delay time can
be set by external capacitors
通过改变外接电容大小设罝过放电、过电流 1、过电流2检测延迟时间
(5) Charger detection, load detection
充电器、负载检测功能
(6) Controlling the state of charge or discharge by external signals
可通过外部信号控制充电、放电状态
(7)
The maximum output voltage of CO / DO: 12V
充、放电控制端子最高输出电压
(8) Temperature protection
温度保护功能
(9) Breaking wire protection
忻线保护功能
(10)
Low power consumption
低功粍
? Operation mode (with NTC resistor)
20 MA
工作时(接 NTC 电阻)
? Operation mode (without NTC resistor)
12 MA
工作时(无 NTC 电阻)
? Sleeping mode
5 uA
休眠时
typical
典型值
typical
典型值
typical
典型值
(u) Environmental friendly material, Pb free, halogen free
环保材料,无铅 Pb 无卤素
Applications /应用领域
?Power tool /电动工具
?Electric bicycle/电动自行车
?UPS backup battery /后备电源
BM3560 系列是一款6节专用的可充电电池保护芯片,具有高精度、高集成度的特点,适用于中高端电
动工具,电动自行车以及 UPS 后各电源等应用领域。芯片迎过检测各 节电池的电压、充放电电流、环境温
度以及采样线通桥等信息实现电池过充、过放、放电过电流、短路、充电过电流、高低温以及断线等保护功
能,同时可通过外置电容灵活调节过放、放电过流1、放电过流2的保护延时。